Skip to main content
Cap size checker

How big can embroidery be on a hat?

Keep cap front designs under about 2.25 in (57 mm) tall; typical cap fronts are about 3 to 4 in (80 to 100 mm) wide. Visor designs stay under about 1.5 in (38 mm) tall.

in
in
Design size3.5 x 2 in (89 x 51 mm)
Height limit hereunder about 2.25 in (57 mm)
Typical widthabout 3 to 4 in (80 to 100 mm)

Fits

Stitch from the center outward, and test on a spare cap first.

How to use it

  1. Enter the design's width and height, in inches or millimeters.
  2. Choose where it goes: the cap front or the visor.
  3. If it is too tall, make it smaller. For a finished stitch file, a change of more than about 10 to 20 percent needs digitizing again at the new size.

Stitching caps

  • Stitch from the center outward and from the bottom up, so the fabric is pushed toward the edges.
  • Always use underlay, and make borders at least 0.08 in (2 mm) wide.
  • Stitch a test on a spare cap first.

Questions

How big can a design be on a hat?

Keep cap front designs under about 2.25 in (57 mm) tall. Typical cap fronts are about 3 to 4 in (80 to 100 mm) wide.

How big can a design be on a cap visor?

Keep visor designs under about 1.5 in (38 mm) tall.

How should a cap design be stitched?

Stitch from the center outward and from the bottom up, so the fabric is pushed toward the edges. Always use underlay, and make borders at least 0.08 in (2 mm) wide.

My design is wider than 4 in. Will it fit?

It is wider than a typical cap front, so check the cap and your machine's cap frame before you stitch, and test on a spare cap first.