Skip to main content
Hoop size picker

What size hoop do I need for my embroidery design?

The smallest hoop whose sewing field is at least as big as your design. Common sizes are 4 x 4 in (100 x 100 mm), 5 x 7 in (130 x 180 mm) and 6 x 10 in (160 x 260 mm); enter your design size to see which one fits.

in
in
Design size3.5 x 3 in (89 x 76 mm)
4 x 4 in (100 x 100 mm) hoopFits
5 x 7 in (130 x 180 mm) hoopFits
6 x 10 in (160 x 260 mm) hoopFits

Smallest hoop: 4 x 4 in (100 x 100 mm)

Your machine's manual gives the exact sewing field for each hoop. Hoop names are nominal; the mm figure is the typical sewing field.

How to use it

  1. Enter the design's width and height, in inches or millimeters.
  2. See the smallest common hoop it fits, and whether it fits only when turned sideways.
  3. Check your machine's manual for the exact sewing field, which is a little smaller than the hoop's frame.

Typical design sizes by placement

  • Left chest on a shirt: usually about 3 to 4 in (75 to 100 mm) wide.
  • Cap front: under about 2.25 in (57 mm) tall, about 3 to 4 in (80 to 100 mm) wide.
  • Cap visor: under about 1.5 in (38 mm) tall.

Questions

What size hoop do I need for my design?

The smallest hoop whose sewing field is at least as big as the design. Common sizes are 4 x 4 in (100 x 100 mm), 5 x 7 in (130 x 180 mm) and 6 x 10 in (160 x 260 mm).

Is the sewing field the same as the hoop size?

No. The sewing field is a little smaller than the hoop's frame. Your machine's manual gives the exact field for each hoop, so check it when a design is close to the limit.

How big should a left chest design be?

Left chest designs on shirts are usually about 3 to 4 in (75 to 100 mm) wide. Up to about 3.9 in (100 mm) fits a 4 x 4 in hoop; check your manual's sewing field.

How big can a design be on a cap?

Keep cap front designs under about 2.25 in (57 mm) tall and visors under about 1.5 in (38 mm). Typical cap fronts are about 3 to 4 in (80 to 100 mm) wide.