Skip to main content
Inches to mm

Embroidery inches to mm converter

One inch is 25.4 mm, so a 4 x 4 in hoop is about 100 x 100 mm and a 5 x 7 in hoop is about 130 x 180 mm. Type in either box to convert, or use the table of common embroidery sizes below.

in
mm

How to use it

  1. Type a size in inches to see it in millimeters, or type millimeters to see inches.
  2. Use the table for hoop, placement and lettering sizes you look up often.

Common embroidery sizes in inches and mm

SizeInchesMillimeters
4 x 4 in hoop4 x 4 in100 x 100 mm
5 x 7 in hoop5 x 7 in130 x 180 mm
6 x 10 in hoop6 x 10 in160 x 260 mm
Left chest design (width)3 to 4 in75 to 100 mm
Cap front design (height, under)2.25 in57 mm
Cap visor design (height, under)1.5 in38 mm
Smallest letter, 40 wt thread0.2 in5 mm
Smallest letter, 60 wt thread0.16 in4 mm
Letters on towels0.4 in10 mm
Thinnest line or gap0.04 in1 mm
Widest satin on clothing0.28 in7 mm

Hoop names are nominal; the mm figure is the typical sewing field. Your machine's manual gives the exact field.

Questions

How many millimeters is a 4x4 embroidery hoop?

A 4 x 4 in hoop is about 100 x 100 mm. A 5 x 7 in hoop is about 130 x 180 mm, and a 6 x 10 in hoop is about 160 x 260 mm. Hoop names are nominal and the mm figure is the typical sewing field, so check your machine's manual for the exact field.

How do I convert inches to millimeters?

Multiply inches by 25.4. To go from millimeters to inches, divide by 25.4.

How wide is 1 mm in inches?

About 0.04 in. Many embroidery rules are given in millimeters: lines at least 1 mm wide, satin up to about 7 mm wide on clothing, and letters at least 5 mm tall with 40 wt thread.